Introduction to MultiSIM-week 1 lab

Complete Lab1 — Introduction to MultiSIM”

  1. Open the file entitled “Lab1.ms11” Lab1.ms11
  2. Run simulation and take a screen capture of the measurements
  3. Paste screen capture into a Word document
  4. Create a new file called “Lab1_Revised_StudentID.ms11” with your student id substituted into the file name.
  5. Change the voltage source, R1 and R2 that were part of “Lab1.ms11” to the following:
    1. V1 = 10V
    2. R1 = 100kohm
    3. R2 = 100kohm
  6. Include a voltmeter to measure voltage across R1 and R2
  7. Run simulation and take a screen capture of the measurements
  8. Paste screen capture into a Word document
  9. Save the Word document for upload entitled: “Lab1_Revised_StudentID”
  10. Include the following in the file for upload:
  11. Section I: Lab1

"Get 15% discount on your first 3 orders with us"
Use the following coupon
"FIRST15"

Order Now